Zoom

Share

Stoney Creek - It's in The Blood Vinyl Decal

$29.99 NZD

Not yet rated |Read Review

 or 4 Payments of NZD $7.50 with

Description

Stoney Creek vinyl decals are a great way to show off your love of hunting and the great outdoors.
All vinyl decals are die cut which means there is no background, not even a transparent one – just the image itself.

Great decal for the back of the truck. Represent!

Choose a colour and size from the options below

Available Options



Application Instructions


WHAT YOU’LL NEED

- Soapy water or cleaning alcohol         - A ruler or spirit level                                        

- Cloths or paper towels                         - Bank card (or similar)

- Masking tape


STEP 1
Prepare the sticker for application by firmly rubbing a bank card (or similar) across the clear transfer and sticker. This removes any air bubbles that may have formed and makes the sticker cling to the transfer film

STEP 2
Clean the surface you’re applying the sticker to with cleaning alcohol (soapy water will do a good job as long as the surface is dried properly afterwards).  Do not use window cleaner.

STEP 3
Use the bottom of the text on the sticker to determine if it is straight - you can use a level or a ruler to measure this. Place the sticker in desired location with a piece of masking tape at the top to hold in place.

STEP 4
Flip the sticker over (be sure not to pull off masking tape) and remove the white paper backing off the sticker.  Hold onto the bottom of the sticker.

STEP 5
Slowly lower the sticker (from the top) and rub it onto the surface with bank card (or similar). Start at the top middle and then work on the outer edges. Firmly rub the sticker in place to make sure there is no air trapped under the sticker. Repeat as you work down to the bottom edge.

STEP 6
For best results, wait approximately 15 minutes then slowly peel the clear film off  at an angle (start from a corner). Be careful not to pull the sticker off your surface. If the sticker pulls away, firmly push back down in place with the film and try removing again gently.


 

 

Reviews (0)
Write a review


Not yet rated

(0)

(0)

(0)

(0)

(0)